Home PRODUCTS Heat Meter Test Bench Series DN15-50 Heat Meter Test Bench Series DN15-D50 Fully Automatic Heat Meter Test Bench (Piston prover method)

PRODUCTS

New Products

DN15-D50 Fully Automatic Heat Meter Test Bench (Piston prover method)

Send Inquiry

Product Description

Product Introduction

1. High Production Efficiency: 300 water meters can be tested in eight hours.

2. Fast Input Method: Wireless barcode scanner input of meter numbers, fast, accurate, and convenient.

3. Energy Saving and Consumption Reduction: Saves water, electricity, and labor.

4. Compact Size: Saves space, fully automated, shares a network, and saves auxiliary materials.

5. Novel Structure: European standard aluminum profile frame, 304 stainless steel piping, novel and stylish appearance.

6. Detailed Product Information: Request from sales personnel

Product Models: JYM-15-50-10-AWH-HS4.0, JYM-15-50-10-AWSH-HS4.0, JYM-15-50-07-AWHP-HS4.0

Device Uncertainty	Urel≤0.2%（k=2）
Flow Stability	1.0% for start‑stop method; 0.2% for other methods
Test Medium	Purified tap water
Operating Humidity	≤ 93% RH
Operating Water Temperature	20 ℃ ± 10 ℃
Water Temperature Fluctuation in Single Measurement	Water temperature fluctuation in a single measurement
Water Fluctuation Coefficient per Cycle	≤ ± 0.1%
Water Source Working Pressure	0.0–0.5 MPa (adjustable)
Air Source Working Pressure	0.4–0.7 MPa
Device Operating Temperature	4–50 ℃
Number of Meters Under Test	DN15: 10 pcs \| DN20: 8 pcs \| DN25: 6 pcs \| DN32/40/50: 1 pc \| Vertical water meters (DN15/DN20/DN25): 6 pcs \| Vertical water meter (DN32): 2 pcs \| Vertical water meter (DN40): 2 pcs \| Vertical water meter (DN50): 1 pc
Water Pump	1 × Nanfang CHM10‑50 (flow rate: 8 m³/h, head: 48 m); 1 × TD50‑40G/2 (flow rate: 50 m³/h, head: 30 m)
Water Tank	2000 L
Commutator	DN25 & DN50 cross‑fork pneumatic open commutator; low noise, high sensitivity; travel difference 0 ms; uncertainty within 0.002%
Meter Clamping Mechanism	Dual‑cylinder outward‑push series pneumatic clamping mechanism; single pneumatic clamps for front 10 and rear 5 positions
Water Meter Seal Test	Pressure range: (0–2.0) MPa
Bore Diameter	Φ50 mm, telescopic stroke ≥ 80 mm
Timer	(10–100) kHz (adjustable); better than 10⁻⁶
Calibration Signal	Pulse signal, f = (0–10) kHz
Vacuum System	Differential pressure vacuum generator; vacuum water filling to keep water meters fully filled
Supported Operation Modes	Fully automatic, semi‑automatic, touchscreen manual operation
Acquisition Equipment	10 sets of mobile phones with ≥ 40‑megapixel resolution
Standard Device	Piston prover method
Flow Range	（0.003-40）m³/h
Calibration Method	Start‑stop method	Flow–Time Method
Rotameter Instantaneous Flow Display Basic	LZ/W30-15 4-90L/h
	LZ/W30-25 20-500L/h
	LZ/W30-25 120-1600L/h
	LZ/W30-50 500-8000L/h
	LZB-80 7000-40000 L/h
Electromagnetic Flow Meter Instantaneous Flow Display Advanced (Class 0.5)	DN2：3-90L/H
	DN10：20-500L/H
	DN25：500-800L/H
	DN50：8000-40000L/H
	Thermostat Standard for Heat Meter Calibration Device
Standard Platinum Resistance Thermometer	Class 2
Digital Meter	WZPB-2 6½-digit digital meter for temperature acquisition
High Temperature Thermostatic Bath	WL-L1A (High Temp. Bath) Measuring range: (4 – 95) ℃ Max. working temperature difference: 0.03 ℃ Average temperature difference: 0.015 ℃
Low Temperature Thermostatic Bath	WL-L1B (Low Temp. Bath) Measuring range: (room temperature – 95) ℃ Max. working temperature difference: 0.03 ℃ Average temperature difference: 0.015 ℃
Heating Device	Customized according to the water tank size.

DN15-D50 Fully Automatic Heat Meter Test Bench (Piston prover method)

Product Description

Related Products

DN15-D50 Fully Automatic Heat Meter Test Bench (Piston Method + Mass Method)

DN15-D50 Fully Automatic Heat Meter Test Bench (Mass Method + Master Meter Method)

DN15-D50 Fully Automatic Heat Meter Test Bench (Master meter method)

DN15-D50 Fully Automatic Heat Meter Test Bench (Mass method)

SEND INQUIRY